Agilent 1200 HPLC G1367C High Performance Autosampler SL

The Agilent 1200 HPLC G1367C High Performance Autosampler SL is a high-performance autosampler engineered for precise, reproducible injections and efficient liquid chromatography workflows. Designed to operate at pressures up to 600 bar, this system delivers consistent performance across demanding applications while maintaining excellent injection precision and minimal carryover. With a flexible injection range from 0.1 to 100 uL and fast cycle times typically under 30 seconds, the G1367C enhances throughput without compromising analytical accuracy. Low carryover performance and the ability to handle a broad sample viscosity range ensure reliable results across different sample types. Communication interfaces, including CAN, and RS232C, enable smooth integration with existing HPLC systems and laboratory workflows.

Built with reliability and compliance in mind, the Agilent 1200 HPLC G1367C High Performance Autosampler SL includes GLP-focused features such as early maintenance feedback and electronic tracking of maintenance and errors. Safety features like leak detection, safe leak handling, and low-voltage maintenance areas provide added protection during operation. Combined with fast injection cycles and robust performance, this autosampler is well-suited for laboratories requiring high precision, efficiency, and dependable operation.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Agilent 1200 HPLC G1367C High Performance Autosampler SL Specifications

Pressure	Up to 600 bar (8700 psi)
GLP Features	Early maintenance feedback (EMF), electronic records of maintenance and errors
Communications	Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
Safety Features	Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
Injection Range	0.1 to 100 ul in 0.1 ul increments
Precision	Typically < 0.25% RSD of peak areas from 5 to 100 ul Typically < 1% RSD of peak areas from 1 to 5 ul
Carryover	Typically < 0.01 % using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 ul caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port
Sample Viscosity Range	0.2 to 50 cp
Sample Capacity	2 × well plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in 2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials 54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate
Injection Cycle Time	Typically < 30 s using following standard conditions: Default draw speed: 200 ul/min Default eject speed: 200 ul/min Injection volume: 5 ul
Ambient Operating Temperature	4 to 55°C (41 to 131°F)
Dimensions (H x W x D)	13.5 x 17 x 8 in. (34.5 x 44 x 20 cm)
Weight	34.2 lbs. (15.5 kg)
Electrical Requirements	100-120V / 220-240V, 50/60Hz

Downloads