Fisher Scientific accuSpin Micro 17R Refrigerated Centrifuge
The Fisher Scientific AccuSpin Micro 17R is a refrigerated microcentrifuge capable of reaching speeds of 13,300 RPM. This small but robust machine makes spinning tissue culture samples a breeze. This benchtop refrigerated centrifuge includes a fixed angle rotor and handles a maximum of twenty-four 1.5/2.0 mL tubes. This sleek small design makes it ideal for labs looking to optimize lab space. The Fisher Scientific AccuSpin Micro 17R comes with microprocessor control allowing the user to program their runs with the push of a few buttons. Fisher Scientific AccuSpin Microcentrifuge has fast acceleration that goes up to 17,000 x g is 12 seconds. The item offers cooling to -9c in just 9 minutes, in addition, this unit is whisper quiet and provides no noticeable noise in a regular lab environment.
INCLUDED:
The Fisher Scientific accuSpin Micro 17R Refrigerated Centrifuge includes:
The Fisher Scientific accuSpin Micro 17R Refrigerated Centrifuge includes:
- > 24 x 1.5/2.0mL Rotor (75003424) & Lid
- > NIST Centrifuge Calibration and Preventative Maintenance Report
- > Power Cord
- > Operator's Guide
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific accuSpin Micro 17R Refrigerated Centrifuge Specifications
|
Capacity |
24 x 1.5/2.0ml |
|
Display |
LED |
|
Max Speed |
13,300 RPM |
|
Max RCF |
17,000 x g |
|
Timer |
1 to 99 min |
|
Temperature Range |
-9°C to +40°C |
|
Noise Level |
<56 dBA |
|
Dimensions (L x W x H) |
295 x 300 x 445 mm |
|
Electrical Requirements |
120V, 3.9A, 60 Hz, 330W |
Centrifuge Inspection and Recertification Checklist
- Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
- Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
- Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
- Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
- Check the door mechanism alignment to ensure secure and smooth opening and closing
- Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
- Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
- Replace and confirm full functionality of all lid lock switches to maintain secure closure
- Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
- Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
- Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
- Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
- Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
- Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
- Check the centrifuge error log to ensure zero recorded issues, confirming system reliability
Technician Inspection and Recertification Checklist: Centrifuges
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment| Task | Completed? | Remarks? |
| Confirm power supply output voltages match specified requirements | Completed | |
| Measure and verify voltages at PCB test points for accuracy | Completed | |
| Confirm rotor compatibility and detection for proper identification | Completed | |
| Inspect exterior for cosmetic or structural damage | Completed | |
| Check door mechanism alignment for secure opening and closing | Completed | |
| Inspect and replace gas strut with OEM part as needed | Completed | |
| Examine rotor chamber for dents or damage and replace if necessary | Completed | |
| Replace and confirm functionality of all lid lock switches | Completed | |
| Lubricate door lock mechanism and lid lock rail for smooth operation | Completed | |
| Test compressor (if applicable) for proper operation and cooling | Completed | |
| Run 8-12 hour cycle test to ensure consistent performance | Completed | |
| Check rotor motor for stability, noise, and integrity | Completed | |
| Inspect and clear condensation drain to prevent buildup | Completed | |
| Verify RPM accuracy with NIST traceable tachometer and calibrate | Completed | |
| Check centrifuge error log for zero recorded issues | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Preventative Maintenance Performed on The Fisher Scientific accuSpin Micro 17R Refrigerated Centrifuge
- Door Latch Assembly Checked for Full Function
- Door Hinges are Checked and Lubed as Needed
- Drive Belt is Checked for Rips and Tears and Replaced if Needed
- Rotors and O-rings are Lubed as Needed
- Lamps and Display are Checked and Replaced if Dim
- Line Cord is Checked for Signs of Fray or Damage and Replaced Accordingly
- Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly
Click Here to View the Technical Specs for the accuSpin Micro 17R
