Fisher Scientific Isotemp 215 Digital Water Bath
Temperature Range
Ambient to 100°C
Temperature Uniformity
±0.24°C at 37°C
Capacity
5L and 10L
Features
- Microprocessor control ensures precise temperature management.
- Equipped with unique “fins” for safer, easier opening and protection from hot vapors.
- The cover can stay open at a 90° position or be completely removed for accommodating large glassware.
- Cool-touch plastic rim stays cool even when operating at maximum temperature, enhancing user safety.
- Power-on self-test automatically checks vital circuitry upon turning on the unit, with warning messages for detected issues.
- Calibration adjustment allows for front panel accessed calibration to optimize accuracy for commonly used temperatures.
- Dual thermostats for controlling the set point temperature as well as monitoring the overall product for overheating.
The Fisher Scientific Isotemp 215 Dual Water Bath features a microprocessor controlled water bath with a digital control/readout, volume 10 L and 5L, temperature up to 99.9°C, temperature uniformity 0.24°C at 37°C, stability 0.5°C at 37°C, 120 V.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The Fisher Scientific Isotemp Dual Digital 215 Water Bath includes:
The Fisher Scientific Isotemp Dual Digital 215 Water Bath includes:
- > Lids
- > Operator's Manual
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Fisher Scientific Isotemp Digital 215 Water Bath Specifications
| Temperature Range | Ambient to 100°C |
| Temperature Uniformity | ±0.24°C at 37°C |
| Control | Digital |
| Capacity | 5L and 10L (1.3 gal and 2.6 gal) |
| Bath Dimensions (L x W x H) | 5L Bath: 6.1 x 11.8 x 5.9 in (15.4 x 30 x 15 cm) 10L Bath: 11.9 x 13 x 5.9 in (30.1 x 33 x 15 cm) |
| Electrical Requirements | 120V |
| Temperature Stability | ±0.5°C at 37°C |
Water Bath Inspection and Recertification Checklist
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment| Task | Completed? | Remarks? |
| Confirm power supply and PCB output stable, correct voltages across circuits | Completed | |
| Inspect display for dim, flickering, or dead pixels; replace for clarity | Completed | |
| Verify functionality of all buttons, knobs, and switches for responsive control | Completed | |
| Inspect water reservoir for holes, rust, or structural damage | Completed | |
| Fill reservoir with water; check for external or internal leaks | Completed | |
| Examine lid for wear or damage; replace hinges or handles as needed | Completed | |
| Inspect for internal leaks from water reservoir to confirm plumbing integrity | Completed | |
| Check internal wiring for damage; replace underperforming components for safety | Completed | |
| Examine internal insulation for burns, breaks, or deterioration; replace as needed | Completed | |
| Confirm feet are intact and bath is balanced on flat surface | Completed | |
| Calibrate temperature accuracy and uniformity with NIST-traceable probe | Completed | |
| Perform cosmetic inspection to confirm quality of external surfaces and finishes | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Fisher Isotemp 215 Manual
Click Here to View all the Technical Specs for the Isotemp 215
Click Here to View the Technical Specs for the Isotemp 215
