Invitrogen PowerEase Touch 350W Power Supply
Voltage Range
2 to 300VDC
Current Range
0.01 to 3A
Maximum Output Power
350W
Features
- Touch-screen TFT-LCD display with intuitive graphical user interface
- Operates in constant voltage, constant current, or constant power modes with automatic crossover
- Stores up to 100 user-defined methods with 20 programmable steps per method
- Pause and edit function allows parameter adjustments during operation
- Four sets of output terminals for simultaneous electrophoresis runs
- Adjustable settings for beep volume, screen brightness, and sleep mode duration
- Comprehensive safety features including no load, overload, over-temperature, and ground leak detection
- Stackable, compact housing with pop-up feet for adjustable viewing angle
- Ideal for DNA/RNA electrophoresis, SDS-PAGE, and native PAGE applications
Supporting up to four electrophoresis units simultaneously, the PowerEase Touch 350W enables efficient high-throughput operation. Built-in method programming allows storage of up to 100 user-defined protocols with 20 steps each, and a pause/edit feature lets users adjust parameters mid-run. The unit’s comprehensive safety system includes overload, over-temperature, and ground leak detection, while its stackable, compact housing saves bench space. With durable construction, advanced programming flexibility, and precise control, this power supply provides reliable and reproducible electrophoresis results for research and routine lab applications.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The Invitrogen PowerEase Touch 350W Power Supply includes:
The Invitrogen PowerEase Touch 350W Power Supply includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Invitrogen PowerEase Touch 350W Power Supply Specifications
| Voltage Range | 2 to 300VDC |
| Current Range | 0.01 to 3A |
| Maximum Output Power | 350W |
| Display | Backlit TFT-LCD Graphic type |
| Operating Modes | Constant voltage, constant current, constant power |
| Crossover | Automatic |
| Timer | Up to 999 min per step |
| Terminal Pairs | 4 (4 positive voltage and 4 negative voltage) |
| Safety Features |
No load detection
Load change detection Overload detection Ground leak detection |
| Dimensions (W x D x H) | 9.1 x 11.9 x 4 in. (23 x 30.3 x 10.2 cm) |
| Weight | 5.3 lbs. (2.4 kg) |
| Electrical Requirements | 115VAC, 50/60Hz |
Electrophoresis Power Supply Inspection and Recertification Checklist
- Verify internal power supply output for correct voltage in alignment with equipment specifications
- Inspect LED display for any dim or dead pixels, ensuring optimal readability
- Examine internal wiring and connections, checking for any rips, tears, or compromised insulation
- Ensure fan is clean and fully operational to maintain adequate cooling
- Test PCB test points for proper voltage output, confirming consistent circuit performance
- Validate functionality of all buttons and switches, ensuring responsive control
- Measure and confirm constant voltage, amplitude, and wattage using precise resistance values
- Cross-check displayed voltage with multimeter readings for accuracy
- Monitor for rapid resistance changes, software errors, and power fluctuations
- Inspect line cord for any signs of wear, cuts, or damage impacting safety
- Confirm cosmetic condition meets quality standards, free of any damage affecting functionality or aesthetics
Technician Inspection and Recertification Checklist: Electrophoresis Power Supplies
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Verify internal power supply output voltage | Completed | |
| Inspect LED display for dim or dead pixels | Completed | |
| Examine internal wiring for rips or tears | Completed | |
| Ensure fan is clean and fully operational | Completed | |
| Test PCB test points for voltage accuracy | Completed | |
| Validate functionality of buttons and switches | Completed | |
| Confirm constant voltage, amplitude, and wattage with resistance | Completed | |
| Cross-check displayed voltage with multimeter | Completed | |
| Monitor for rapid resistance changes and power fluctuations | Completed | |
| Inspect line cord for wear or damage | Completed | |
| Confirm cosmetic condition meets quality standards | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Click Here to View the Technical Specs for the Invitrogen PowerEase Touch 350W Power Supply
