Life Technologies PowerEase 90W Electrophoresis Power Supply
Voltage Range
2 to 300V
Current Range
4 to 500 mA
Maximum Output Power
90W
Features
- Microprocessor-controlled system designed for reliable electrophoresis performance
- Supports DNA/RNA electrophoresis, SDS-PAGE, and native PAGE applications
- Constant voltage and constant current operating modes for protocol flexibility
- Four sets of output terminals enable simultaneous operation of multiple units
- Backlit LCD graphic display with clear menu prompts for easy setup and monitoring
- Programmable timer allows users to specify run durations
- Compact footprint with stackable design to conserve valuable bench space
- Built for efficient operation across a range of electrophoresis workflows
The Life Technologies PowerEase 90W Electrophoresis Power Supply is a microprocessor-controlled solution engineered to support a wide range of electrophoresis applications in a single, user-friendly unit. Designed with efficiency in mind, this compact power supply features a space-saving footprint and stackable design, making it ideal for labs where bench space is limited. It delivers reliable performance for DNA/RNA electrophoresis, SDS-PAGE, and native PAGE workflows.
Equipped with four sets of output jacks, the system allows simultaneous operation of multiple electrophoresis units, maximizing productivity without sacrificing control. Users can select between constant voltage or constant current modes to suit specific protocols, while the backlit LCD graphic display provides clear prompts for straightforward setup and monitoring. With adjustable run durations and precise control over voltage and current, the PowerEase 90W ensures consistent, repeatable results across a variety of applications.
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The Life Technologies PowerEase 90W Electrophoresis Power Supply includes:
The Life Technologies PowerEase 90W Electrophoresis Power Supply includes:
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
Life Technologies PowerEase 90W Electrophoresis Power Supply Specifications
| Voltage Range | 2 to 300V |
| Current Range | 4 to 500 mA |
| Maximum Output Power | 90W |
| Operating Modes | Constant voltage and constant current |
| Timer | ~99.99 hr/min |
| Terminal Pairs | 4 (4 x positive voltage and 4 x negative voltage) |
| Display | Backlit LCD Graphic type |
| Dimensions (W x D x H) | 7.8 x 11.4 x 2.7 in. (20 x 29 x 7 cm) |
| Weight | 2.2 lb. (1.2 kg) |
| Electrical Requirements | 115 or 230V, 50/60Hz, 150W |
Electrophoresis Power Supply Inspection and Recertification Checklist
- Verify internal power supply output for correct voltage in alignment with equipment specifications
- Inspect LED display for any dim or dead pixels, ensuring optimal readability
- Examine internal wiring and connections, checking for any rips, tears, or compromised insulation
- Ensure fan is clean and fully operational to maintain adequate cooling
- Test PCB test points for proper voltage output, confirming consistent circuit performance
- Validate functionality of all buttons and switches, ensuring responsive control
- Measure and confirm constant voltage, amplitude, and wattage using precise resistance values
- Cross-check displayed voltage with multimeter readings for accuracy
- Monitor for rapid resistance changes, software errors, and power fluctuations
- Inspect line cord for any signs of wear, cuts, or damage impacting safety
- Confirm cosmetic condition meets quality standards, free of any damage affecting functionality or aesthetics
Technician Inspection and Recertification Checklist: Electrophoresis Power Supplies
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Verify internal power supply output voltage | Completed | |
| Inspect LED display for dim or dead pixels | Completed | |
| Examine internal wiring for rips or tears | Completed | |
| Ensure fan is clean and fully operational | Completed | |
| Test PCB test points for voltage accuracy | Completed | |
| Validate functionality of buttons and switches | Completed | |
| Confirm constant voltage, amplitude, and wattage with resistance | Completed | |
| Cross-check displayed voltage with multimeter | Completed | |
| Monitor for rapid resistance changes and power fluctuations | Completed | |
| Inspect line cord for wear or damage | Completed | |
| Confirm cosmetic condition meets quality standards | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Click Here to View the Technical Specs for the Life Technologies PowerEase 90W Electrophoresis Power Supply
