MP Biomedicals SpinPrep Centrifuge
Maximum Speed
14,000 RPM
Maximum Capacity
24 x 1.5/2ml tubes
Timer
0.1 to 30 Minutes
Features
- Compatible with most common rotors, including Beckman Coulter, without the need for adapters
- Bidirectional spinning capability enhances separation efficiency
- Compact tabletop design ideal for space-conscious labs
- Large digital display for easy programming of speed and spin direction
- Secure lid latch system ensures operational safety
- Ideal for processing plant and animal tissue, yeast, bacteria, wastewater, seeds, roots, and food samples
- Stores up to five user-defined programs for routine protocols
- Manual dome release string provides added safety during power loss
- Low-maintenance design supports long-term use with minimal upkeep
Unlike conventional centrifuges, the SpinPrep supports direct rotor compatibility—including select Beckman Coulter models—without requiring adapters, saving time and cost. Bidirectional spinning, with selectable clockwise or counterclockwise rotation, improves separation efficiency for demanding protocols. The secure dome is manually latched and features an emergency string release for added safety. An intuitive LCD display and soft-key interface allow quick programming of speed (RPM or RCF), run time, acceleration profile (Fast or Slow), and spin direction. Five user-definable programs can be saved and recalled instantly to further streamline routine tasks. With quiet operation, a compact footprint, and low-maintenance design, the MP Biomedicals SpinPrep Centrifuge offers outstanding performance and ergonomic convenience for high-throughput environments.
All of our equipment is fully tested to perform at factory specifications before being shipped.
INCLUDED:
The MP Biomedicals SpinPrep Centrifuge includes:
The MP Biomedicals SpinPrep Centrifuge includes:
- > 24 x 1.5/2ml Fixed Angle Rotor
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
MP Biomedicals SpinPrep Centrifuge Specifications
| Maximum Speed | 14,000 RPM |
| Maximum RCF | 15,000 x g |
| Maximum Capacity | 24 x 1.5/2ml |
| Timer | 0.1 to 30 Minutes |
| Program Memory | 5 Programs |
| Acceleration | Fast or Slow <30 seconds to maximum speed |
| Deceleration | <30 seconds to stop |
| Operating Temperature | 15 to 35°C |
| Dimensions | 13.1 x 17.2 x 18.3 in. (33.2 x 43.7 x 46.5 cm) |
| Weight | 39.5 lb. (17.9 kg) |
| Electrical Requirements | 100-220V, 50/60Hz, 400W |
Centrifuge Inspection and Recertification Checklist
- Confirm the power supply output voltages match specified requirements for stable distribution to all internal components
- Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity
- Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type
- Inspect the exterior for any cosmetic or structural damage that could affect performance or safety
- Check the door mechanism alignment to ensure secure and smooth opening and closing
- Inspect and replace the gas strut with an OEM part to maintain proper door support and safety
- Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation
- Replace and confirm full functionality of all lid lock switches to maintain secure closure
- Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation
- Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control
- Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use
- Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation
- Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber
- Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary
- Check the centrifuge error log to ensure zero recorded issues, confirming system reliability
Technician Inspection and Recertification Checklist: Centrifuges
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment| Task | Completed? | Remarks? |
| Confirm power supply output voltages match specified requirements | Completed | |
| Measure and verify voltages at PCB test points for accuracy | Completed | |
| Confirm rotor compatibility and detection for proper identification | Completed | |
| Inspect exterior for cosmetic or structural damage | Completed | |
| Check door mechanism alignment for secure opening and closing | Completed | |
| Inspect and replace gas strut with OEM part as needed | Completed | |
| Examine rotor chamber for dents or damage and replace if necessary | Completed | |
| Replace and confirm functionality of all lid lock switches | Completed | |
| Lubricate door lock mechanism and lid lock rail for smooth operation | Completed | |
| Test compressor (if applicable) for proper operation and cooling | Completed | |
| Run 8-12 hour cycle test to ensure consistent performance | Completed | |
| Check rotor motor for stability, noise, and integrity | Completed | |
| Inspect and clear condensation drain to prevent buildup | Completed | |
| Verify RPM accuracy with NIST traceable tachometer and calibrate | Completed | |
| Check centrifuge error log for zero recorded issues | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
