Out of Stock? We Recommend This Alternative
Heidolph Tuttnauer 2340E Digital Autoclave
- 19 L Chamber Volume
- 3 Stainless Steel Trays
- Brand New
- 6 Month Parts and Labor Warranty
Tuttnauer 2340M Autoclave
The Tuttnauer 2340M features automatic shut off at the end of both the sterilization and dry cycles, double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Chamber Volume 9"x18". Voltage: 120V Power: 1400.
All of our equipment is in excellent condition and will be fully tested before being shipped.
The Tuttnauer 2340M Analog Autoclave includes:
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
Tuttnauer 2340M Autoclave Specifications
|
Chamber
Volume
|
19 L (5 gal)
|
|
Chamber Size
(Diameter x Depth)
|
9 x 18 in
|
|
Temperature Range
|
100 to 134C
|
|
Standard
Cassettes Capacity
|
2 full / 2
half
|
|
Number of
Trays
|
3
|
|
Tray
Dimensions
|
6.7 x 16.3 in
|
|
Overall
Dimensions (W x H x D)
|
508 x 362 x 550
mm
|
|
Electrical
Requirements
|
120V, 11.7A,
1400W
|
- Verify power supply output to ensure precise voltage delivery as per equipment specifications
- Check full display functionality, replacing any dead or dim pixels for optimal clarity
- Confirm unit is level to maintain stability and accurate operational performance
- Inspect door seal integrity, replacing if any wear or damage compromises airtight performance
- Examine and clean both external and internal filters to ensure unobstructed airflow and system efficiency
- Execute comprehensive cycle testing to validate consistent operation
- Verify printer functionality (if applicable) to ensure precise print outputs without error
- Assess internal plumbing system for any leaks or pressure inconsistencies
- Inspect all electrical connections and wiring for secure attachment and optimal conductivity
- Verify functionality of internal switches to ensure reliable engagement and operational control
- Inspect and clean the water reservoir to maintain purity and prevent contamination
- Confirm accuracy of pressure readings, recalibrating if deviations are identified
- Perform final test cycles, ensuring zero errors for validated operational readiness
Technician Inspection and Recertification Checklist: Autoclaves
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Verify power supply output voltages | Completed | |
| Check display functionality and replace dead/dim pixels | Completed | |
| Confirm unit leveling for stability | Completed | |
| Inspect and replace damaged door seal | Completed | |
| Clean external and internal filters for airflow efficiency | Completed | |
| Conduct comprehensive cycle testing | Completed | |
| Confirm printer functionality (if applicable) | Completed | |
| Assess plumbing for leaks or pressure issues | Completed | |
| Inspect electrical connections for secure and optimal conductivity | Completed | |
| Verify internal switch functionality | Completed | |
| Inspect and clean water reservoir | Completed | |
| Confirm pressure reading accuracy and recalibrate if needed | Completed | |
| Perform final test cycles with zero errors | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Tuttnauer 2340M Autoclave Manual
Click Here to View all the Technical Specs for the 2340M
Click Here to View the Technical Specs for the 2340M
