VWR Digital Dual Heat Block, Cat #: MP949302P1
Temperature Range
Ambient +5C to 120C
Temperature Uniformity
±
0.1C at 37C
Block Capacity
2 Heat Blocks
Features
- Compact and versatile dual block heater design
- High wattage heating elements for efficient performance
- Accepts interchangeable blocks for various tube sizes
- Close tube-and-block contact ensures optimal heat transfer
- Durable construction for long-term laboratory use
- Easy-to-use digital interface for precise control
The VWR Digital Dual Heat Block, Cat #: MP949302P1 accommodates 2 blocks and features high wattage, constant-temperature heaters that are economical, versatile, and compact. This model accepts several interchangeable blocks, accommodating various tube sizes from 0.25mL micro to 50mL. Efficient heater features close tube-and-block contact with a low density design for exceptional temperature uniformity. Please Note: Heat blocks are NOT INCLUDED with this Dry Bath Heater. If you require heat blocks, please inquire.
All of our equipment is fully tested before being shipped.
INCLUDED:
The VWR Digital Dual Heat Block, Cat #: MP949302P1 includes:
The VWR Digital Dual Heat Block, Cat #: MP949302P1 includes:
- > Power Cord
- > Full 180 Day Parts and Labor Warranty
- > Please Note: Heat blocks are NOT INCLUDED with this Dry Bath Heater. If you require heat blocks, please inquire
VWR Digital Dual Heat Block Specifications
|
Temperature Range |
Ambient +5C to 120C |
|
Temperature Stability |
0.1C |
|
Temperature Uniformity |
0.1C |
|
Dimensions (L x W x H) |
15.4 x 8 x 3.5 in (39.1 x 20.3 x 8.9 cm) |
|
Electrical Requirements |
120V, 50/60Hz, 1.7A, 210W |
Dry Bath Heater Inspection and Recertification Checklist
- Verify the number and correct sizes of heat blocks to ensure compliance with system specifications
- Test functionality of all displays, knobs, and switches, ensuring reliable control and accurate readings
- Inspect all internal wiring for any signs of damage, including frays or compromised insulation
- Clean internal insulation and chamber to maintain optimal thermal efficiency and system hygiene
- Check machine feet and confirm the unit sits properly balanced for stable operation
- Use an independent temperature probe to confirm heating accuracy within the specified temperature range
- Validate temperature uniformity across heat blocks for consistent thermal distribution
- Inspect line cord for any signs of wear, cuts, or damage affecting safety or performance
- Ensure cosmetic condition meets quality standards, free of damage that could impact operation or aesthetics
Technician Inspection and Recertification Checklist: Dry Bath Heater
The Following Checklist Is to Be Performed on All Incoming and Outgoing Equipment| Task | Completed? | Remarks? |
| Verify the number and sizes of heat blocks | Completed | |
| Test functionality of displays, knobs, and switches | Completed | |
| Inspect internal wiring for damage | Completed | |
| Clean internal insulation and chamber | Completed | |
| Check machine feet for proper balance | Completed | |
| Confirm heat within range using an independent probe | Completed | |
| Validate temperature uniformity across heat blocks | Completed | |
| Inspect line cord for damage | Completed | |
| Ensure cosmetic condition is acceptable | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Downloads
Click Here to View the Technical Specs for the VWR Digital Dual Heat Block, Cat #: MP949302P1
