VWR WBE05 Digital Water Bath
Temperature Range
Ambient +5°C to 100°C
Temperature Uniformity
± 0.2°C at 37°C
Capacity
5L (1.3 gal.)
Features
- PID microprocessor control system for precise heating
- Proportional heat control to prevent temperature overshoot
- Digital interface with intuitive navigation
- High-temperature alarm with adjustable limit setting
- Redundant safety thermostat for overheating protection
- Durable construction for long-term laboratory use
- Compact design to maximize bench space
- Energy-efficient operation with optimized heat distribution
All of our equipment will be fully tested to perform at factory specifications before being shipped.
INCLUDED:
The VWR WBE05 Digital Water Bath includes:
The VWR WBE05 Digital Water Bath includes:
- > Bath Lid
- > Calibration
- > Power Cord
- > Operator's Manual
- > Full 180 Day Parts and Labor Warranty
VWR WBE05 Digital Water Bath Specifications
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Uniformity | ± 0.2°C at 37°C |
| Temperature Stability | ± 0.1C |
| Control | Digital |
| Capacity | 5L (1.3 gal.) |
| Heater Wattage | 360W |
| Bath Dimensions (W x D x H) | 10.8 x 5 x 6 in. (27.4 x 12.7 x 15.2 cm) |
| Overall Dimensions (W x D x H) | 14.4 x 9.3 x 13.1 in. (36.5 x 23.5 x 33.3 cm) |
| Electrical Requirements | 120V, 60Hz, 3.3A |
Water Bath Inspection and Recertification Checklist
- Confirm power supply and PCB are outputting stable, correct voltages across all essential circuits to ensure reliable operation
- Inspect the display for any dim, flickering, or dead pixels, replacing any compromised sections to maintain full clarity and accurate readouts
- Verify that all buttons, knobs, and switches are functioning properly, providing precise and responsive control across all settings
- Conduct a thorough inspection of the water reservoir for any holes, rust, or other structural damage that may impact its integrity
- Fill the reservoir with water, checking closely for any external or internal leaks that could affect performance
- Examine the lid for any signs of wear or damage, replacing hinges and handles if necessary to ensure a secure and proper seal
- Inspect for any internal leaks originating from the water reservoir, confirming the unit’s internal plumbing integrity
- Conduct a comprehensive inspection of internal wiring for any breakages, tears, or wear; replace any underperforming or damaged components to maintain safe operation
- Examine internal insulation for signs of burns, breaks, or deterioration, replacing as needed to ensure thermal efficiency and safety
- Confirm that all feet are intact and that the bath sits level and balanced on a flat surface to prevent movement or instability
- Calibrate both temperature accuracy and uniformity using a NIST-traceable temperature probe, verifying compliance with specification standards
- Perform a detailed cosmetic inspection to confirm that all external surfaces and finishes meet aesthetic and quality standards
Technician Inspection and Recertification Checklist: Water Bath
The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment| Task | Completed? | Remarks? |
| Confirm power supply and PCB output stable, correct voltages across circuits | Completed | |
| Inspect display for dim, flickering, or dead pixels; replace for clarity | Completed | |
| Verify functionality of all buttons, knobs, and switches for responsive control | Completed | |
| Inspect water reservoir for holes, rust, or structural damage | Completed | |
| Fill reservoir with water; check for external or internal leaks | Completed | |
| Examine lid for wear or damage; replace hinges or handles as needed | Completed | |
| Inspect for internal leaks from water reservoir to confirm plumbing integrity | Completed | |
| Check internal wiring for damage; replace underperforming components for safety | Completed | |
| Examine internal insulation for burns, breaks, or deterioration; replace as needed | Completed | |
| Confirm feet are intact and bath is balanced on flat surface | Completed | |
| Calibrate temperature accuracy and uniformity with NIST-traceable probe | Completed | |
| Perform cosmetic inspection to confirm quality of external surfaces and finishes | Completed |
102 Tide Mill Road, Hampton NH 03842
customerservice@marshallscientific.com | (603) 601-8511 |
www.marshallscientific.com
Copyright © 2024 by Marshall Scientific LLC. All rights reserved.
Click Here to View the Technical Specs for the VWR WBE05 Digital Water Bath
